solo M – the not so mini sibling of solo!
An impressive 92dB/w*m gives you both the dynamics that music deserves, as well as the freedom of choice when it comes to amplifier. We have successfully filled a 60 square meter room 3.2 meters in height, with a 32 watts tube amplifier!

solo M's performance is very close to solo. For instance the impedance is the exact same easy load, and also the tuning frequency allowing a generous bass output down to 35 Hz (an typically lower in domestic room). The line array consists of 4 ceramic 6.25 inch bass/mid-range drivers. They team up with a true ribbon tweeter which have a membrane area 3 times greater than ordinary dome tweeters. The result is distortion free, effortless music - with any amplifier.

The real value of solo M lies in the listening hours, crossover modifications and know how put into its performance.

The ribbon tweeter, has three times greater membrane area than an ordinary dome tweeters. The membrane is still very light and is teamed up with a super strong motor system, which results in top performance and a high efficiency.

As with all Engelholm Audio speakers, terminals are the well proven WBT-0710 Cu.

The stands are milled out of one solid block of a special aluminum alloy. And the alloy makes the difference! It is hand polished and then anodized and it's done here in Sweden – which goes for all labor of the important parts of solo and solo M.

Technical data:
Height x Width x Depth: 1450 x 220 x 350 [mm]
Crossover 2nd order 2200 Hz
Impedance 8 ohm (min 7.1 ohms)
Sensitivity: 92dB/wm
Ported reflex system
Frequency response 35-40'000 Hz